Skip to content
120 FPS Test

Monitor overclocking

Frame Skipping Test

Find out if your monitor really shows every frame. One square lights up per frame, in order. Photograph the grid with a slow shutter and any skipped frame shows up as a gap.

Flashing content warning. This test flashes a light square dozens of times per second. Do not run it if you or anyone watching has photosensitive epilepsy or is sensitive to flashing lights.

Refresh rate

–Hz

Shutter speed

–

Longest exposure

–s

How to run the frame skipping test

  1. 1Check the refresh rate first. The figure above should match the rate you set. If it does not, fix that on the FPS test page before going further.
  2. 2Press Start test and go fullscreen. Close other tabs and apps so the browser does not miss frames itself.
  3. 3Set your camera’s shutter speed. Use the shutter speed shown above, in manual or Pro mode, with the camera held steady or on a stand.
  4. 4Photograph the grid a few times. Look for an unbroken run of lit squares. A dark square in the middle of the run is a skipped frame.

Want to confirm the refresh rate and look for stutter first? Use the FPS test.

Frame skipping FAQ

What is frame skipping?

Frame skipping happens when a monitor accepts a signal at a higher refresh rate than it can really show, usually after overclocking. It reports the new rate, but silently throws away some frames, so motion looks less smooth than the number suggests.

Why can the FPS counter not detect frame skipping?

The browser and graphics card still produce and send every frame, so the frame rate looks perfect from the computer’s side. The frames are lost inside the monitor. Only a camera pointed at the screen can see which ones were actually shown.

What camera settings should I use?

Use manual or Pro mode, set the shutter speed shown above the grid, and keep the phone steady. Low ISO avoids a blown-out image. The exposure must be shorter than the “longest exposure” figure, or the lit square wraps around the grid and overlaps itself.

How do I read the photo?

You should see an unbroken run of lit squares in order, some brighter than others at the ends. A dark square inside the run, such as 4, 5, 7, 8 with 6 missing, means that frame was skipped. Take several photos, as a single gap can come from the browser rather than the monitor.