How to Fix Screen Tearing (PC, Monitor and Games)
To fix screen tearing, turn on variable refresh rate (G-Sync or FreeSync) on both your monitor and your graphics driver, then cap your frame rate a few FPS below your refresh rate. That combination removes tearing in almost every game without the input lag of classic VSync. If your monitor has no VRR, use VSync or a driver option like Fast Sync or Enhanced Sync instead. And before any of that, make sure your screen is really running at its rated refresh rate, because a monitor stuck at 60 Hz makes every tear last longer.
Tearing happens when the GPU sends a new frame while the monitor is partway through drawing the last one, so you see a horizontal split with two frames on screen at once. If you want the full explanation, read what screen tearing is and what causes it. This guide is about making it go away, with the fixes ordered from most to least effective.
How to fix screen tearing: the fixes at a glance
| Fix | Stops tearing? | Input lag | Needs |
|---|---|---|---|
| VRR + FPS cap | Yes | Very low | G-Sync or FreeSync monitor |
| VRR on its own | Only below max Hz | Very low | G-Sync or FreeSync monitor |
| Fast Sync / Enhanced Sync | Mostly | Low to moderate | FPS well above refresh rate |
| VSync | Yes | Highest | Any monitor |
| FPS cap alone | No, reduces it | Low | Any monitor |
Step 1: Turn on variable refresh rate (G-Sync or FreeSync)
Variable refresh rate (VRR) flips the usual relationship: instead of the GPU trying to fit frames into a fixed refresh cycle, the monitor waits for each frame and refreshes when it arrives. No frame ever lands mid-scan, so there is nothing to tear. It is the single most effective way to stop screen tearing on PC. VRR has to be on in several places, so check each of them.
- Monitor menu (OSD). Press the monitor's menu button and look for Adaptive-Sync, FreeSync or VRR. Many monitors ship with it off. On some models it only appears over DisplayPort, so use DisplayPort if you can.
- NVIDIA. Open NVIDIA Control Panel, go to Display > Set up G-SYNC, tick Enable G-SYNC, G-SYNC Compatible, pick your monitor and click Apply. Choose Enable for windowed and full screen mode if you play borderless windowed games. Newer versions of the NVIDIA App also have a G-SYNC switch under System > Displays. NVIDIA documents the Control Panel steps on its Set up G-SYNC help page.
- AMD. Open AMD Software: Adrenalin Edition, click the gear icon, go to the Display tab and turn on the variable refresh option. It is labeled AMD FreeSync, Adaptive Sync Compatible or just VRR depending on the monitor and cable. If it says Not Supported, check the monitor menu and the cable first.
- Windows 11. Go to Settings > System > Display > Graphics and turn on Variable refresh rate (on some builds it sits under Advanced graphics settings). This lets DirectX 11 games that don't support VRR on their own use it anyway. The toggle only appears when the driver and monitor support VRR.
Step 2: Cap your FPS a few frames under your refresh rate
VRR only works inside the monitor's range. When your frame rate climbs past the refresh rate, VRR stops doing anything and you get tearing again (or VSync behavior, depending on your settings). A frame cap keeps you inside the range. The usual advice from Blur Busters' G-Sync testing is to cap at least 3 FPS below the refresh rate, because limiters are not perfectly precise and some frames come in slightly early.
| Refresh rate | Suggested cap |
|---|---|
| 60 Hz | 57 FPS |
| 120 Hz | 117 FPS |
| 144 Hz | 141 FPS |
| 165 Hz | 162 FPS |
| 240 Hz | 235 FPS or a little lower |
Set the cap with whichever of these you have, in this order of preference:
- The in-game limiter. Usually in the video or graphics settings as Max FPS or Frame Rate Limit. It tends to add the least latency.
- NVIDIA Max Frame Rate. NVIDIA Control Panel > Manage 3D settings > Max Frame Rate. Set it per game under Program Settings, or globally if you want one cap everywhere.
- AMD Frame Rate Target Control or Radeon Chill. In AMD Software, open Gaming > Graphics. Frame Rate Target Control sets a fixed maximum (full screen games only). Radeon Chill can act as a cap if you set its minimum and maximum FPS to the same value.
- RivaTuner Statistics Server (RTSS). A free tool that works with any GPU. Type your cap into the Framerate limit box, globally or for one game. It gives very even frame times.
Games with NVIDIA Reflex set their own cap slightly under your refresh rate when Reflex is on alongside G-Sync and VSync, so you may not need a manual one there. To confirm a cap is holding, use an in-game FPS counter.
Step 3: Use VSync as a last resort
VSync makes the GPU wait for the monitor to finish each refresh before swapping in a new frame. It does stop tearing on any monitor, but it adds input lag, and if your frame rate drops below the refresh rate you can get stutter as frames are held for an extra cycle. That is why it comes after VRR. Our VSync explainer covers the trade-offs in detail.
One exception: with G-Sync, the commonly recommended setup is VSync on in NVIDIA Control Panel and off in the game, plus the frame cap from Step 2. With the cap in place, VSync rarely kicks in. It only catches the odd frame that would otherwise tear at the top of the range. Many AMD users apply the same idea with Wait for Vertical Refresh in Adrenalin.
How to stop screen tearing without VSync
- VRR plus a cap is the real answer. Steps 1 and 2 together give you no tearing and almost no added lag.
- Fast Sync (NVIDIA). In Manage 3D settings, set Vertical sync to Fast. The GPU keeps rendering freely and the monitor shows the newest finished frame. It works best when your FPS is well above your refresh rate (roughly double). Near the refresh rate it can feel uneven.
- Enhanced Sync (AMD). In AMD Software > Gaming > Graphics. AMD describes it as a vsync alternative that reduces tearing without limiting frame rate. Some setups report stutter or flicker with it, so test it per game.
A plain FPS cap with no sync at all does not remove tearing on a fixed-refresh monitor. It can make the tear line less frequent, but it won't make it disappear.
Step 4: Check your monitor is running at its rated Hz
Plenty of 144 Hz and 165 Hz monitors spend their lives at 60 Hz because Windows picked that on first connect. At 60 Hz each refresh lasts 16.7 ms, so tears stay on screen longer and are easier to see, and VRR has a much smaller range to work with. Check it:
- Open Settings > System > Display > Advanced display, select your monitor and set Choose a refresh rate to the highest value. Microsoft's refresh rate guide notes that a rate marked with an asterisk needs a different resolution.
- If the rate you want is missing, check the cable and port. Use DisplayPort or the HDMI version your monitor is rated for, plug into the graphics card rather than the motherboard, and avoid cheap adapters.
- Check that the game itself is not set to a lower refresh rate in its display settings.
- Confirm the result with a 120Hz refresh rate test. Browsers sync to the display, so the FPS it shows should match your new setting.
Still tearing? Quick checks
- Borderless windowed games: on NVIDIA, make sure G-Sync is set for windowed and full screen mode. Otherwise try exclusive full screen.
- Two monitors: if the game window is on a second screen without VRR, or a 60 Hz one, it will tear there. Move it to the main display.
- Monitor Technology: on NVIDIA, check that Manage 3D settings > Monitor Technology is set to G-SYNC Compatible for that game.
Once tearing is gone, run a quick FPS test now and then, especially after driver updates or new cables, since a reset to 60 Hz is easy to miss. If you are still choosing a screen, our guide to refresh rate explains what the Hz number buys you.
Frequently asked questions
How do I fix screen tearing without VSync?
Use G-Sync or FreeSync with a frame cap about 3 FPS below your refresh rate. Without a VRR monitor, try NVIDIA Fast Sync or AMD Enhanced Sync, which work best when your frame rate is well above the refresh rate.
Why do I still get screen tearing with G-Sync or FreeSync on?
Usually your frame rate is going above the refresh rate, which takes you out of the VRR range. Add a frame cap a few FPS under your refresh rate, and check that VRR is enabled in the monitor menu as well as the driver.
Does capping FPS stop screen tearing?
On its own, no. A cap without any sync still tears on a fixed-refresh monitor. Paired with G-Sync or FreeSync, a cap is what keeps tearing away at high frame rates.
Can a 60 Hz monitor get rid of screen tearing?
Yes. If it supports FreeSync or Adaptive-Sync, enable it and cap at about 57 FPS. If it has no VRR, VSync is the reliable fix, at the cost of some input lag.
Is screen tearing caused by my monitor or my graphics card?
Neither is faulty. Tearing comes from the GPU and monitor being out of step, so the fix is in how they sync: VRR, VSync or a sync mode in the driver.