Skip to content
120 FPS Test

What Is Screen Tearing and What Causes It?

Screen tearing is a glitch where your monitor shows parts of two (or more) different frames at the same time, split by a horizontal line. It happens when your graphics card hands the monitor a new frame while the monitor is still partway through drawing the previous one. The top of the screen shows the old frame, the bottom shows the new one, and anything moving sideways looks sliced in half where they meet.

Nothing is broken when this happens. It is a timing problem: your GPU and your monitor run on separate clocks, and with nothing keeping them in step, their timing rarely lines up.

What causes screen tearing?

A monitor does not change its whole picture at once. On each refresh it draws the image line by line, from the top of the panel to the bottom. This is called scanout, and on a 60 Hz monitor it repeats 60 times a second, on a 144 Hz monitor 144 times a second, at a fixed pace.

Your graphics card works differently. It renders each frame into a hidden buffer, and the moment a frame is finished it swaps that buffer in as the image the monitor should read from. With VSync off, the GPU does not wait for the monitor to finish its current pass. If the swap happens while scanout is halfway down the screen, the monitor simply keeps drawing, but now from the new frame. The lines above that point came from the old frame; the lines below come from the new one.

Frame 1 (old)Frame 2 (new)tear linescanout
A torn frame. The monitor drew the top from Frame 1, the GPU swapped in Frame 2 mid-scanout, and the rest of the screen came from Frame 2. The moving post is offset at the tear line.

If the image is static, the two frames are identical and you see nothing. The tear only shows when something moves between frames, which is why it stands out most during fast camera turns in games and slow sideways pans in video. The horizontal offset at the tear is exactly how far the object moved between the two frames.

Why is the tear line horizontal?

Because scanout runs from top to bottom, one row at a time. A frame swap can only happen at some point in that top-to-bottom pass, so the boundary between old and new is always a row: a horizontal line. On a screen whose panel scans the other way (some handhelds and tablets use panels mounted sideways) the tear line can run vertically instead.

Frame rate vs refresh rate: why the mismatch causes tearing

Screen tearing in games comes down to two numbers that do not agree. Your refresh rate is how often the monitor draws a new picture, and it is fixed. Your frame rate is how often the GPU finishes a new frame, and it changes from moment to moment with the scene. Unless something forces them to line up, new frames arrive at random points inside each refresh.

Monitor refresh (60 Hz, fixed pace)New GPU frame ready (about 90 FPS, VSync off)lands mid-refresh: tearlands between refreshes: no tear
Each new frame that arrives while the monitor is mid-scanout creates a tear at that height. Only a frame that happens to land in the gap between refreshes is shown cleanly.

Does screen tearing happen below your refresh rate?

Yes. A common belief is that tearing only happens when FPS is higher than the refresh rate. It is more visible then, but the cause is the swap landing mid-scanout, not the frame rate being high. At 50 FPS on a 60 Hz monitor with VSync off, most frames still arrive partway through a refresh, so you still get tears, just fewer of them per second. Capping your frame rate below the refresh rate does not stop tearing on its own.

Why you sometimes see several tears at once

When the GPU renders much faster than the monitor refreshes, say 300 FPS on a 60 Hz screen, it can finish several frames during a single refresh. Each swap adds another tear, so one refresh can be cut into four or five strips from different moments. Each strip is thinner and the offsets between them are smaller, because less time passed between frames.

Is screen tearing a monitor problem or a GPU problem?

Neither part is faulty. If you are asking "why is my screen tearing?", the usual answer is that sync is switched off somewhere, so the GPU is sending frames whenever they are ready. That makes PC screen tearing normal behavior with VSync off, not a sign that the monitor or graphics card is failing.

A few situations make monitor screen tearing more likely:

  • VSync is off in the game and no variable refresh rate (G-SYNC or FreeSync) is active.
  • Your monitor supports G-SYNC or FreeSync but it is turned off in the monitor menu or the GPU driver, or the frame rate has gone outside the range it covers.
  • The display is running at a lower refresh rate than you think (for example 60 Hz instead of 144 Hz), which makes each tear stay on screen longer. The common causes of a 60 Hz cap are listed on our home page.

One real fault can look similar: a loose or damaged cable, or a failing panel, can cause flickering, lines or image corruption that stays put even on the desktop. Real tearing only shows up during motion and moves around.

Is screen tearing bad?

It is not harmful. Tearing is a visual artifact; it does not stress or damage your monitor or graphics card, and it is not a sign that either is wearing out. Whether it is "bad" is a matter of taste and of what you are playing.

Many competitive players leave sync off on purpose. The GPU shows each new frame as soon as it is ready, which keeps input lag as low as possible, and on a fast monitor the tears are hard to spot. In slower, cinematic games, the same tears can be distracting during every camera pan, and a smooth, tear-free image is worth a little extra latency.

Why screen tearing is less visible at high refresh rates

A tear only exists for the refresh it appears in. On the next refresh the screen is redrawn, and any new tear lands somewhere else. So the faster the monitor refreshes, the shorter each tear stays on screen. A higher frame rate helps too, because objects move less between two frames, so the offset at the tear is smaller.

Refresh rateTime per refreshHow long a single tear can stay on screen
60 Hz16.7 msup to 16.7 ms
144 Hz6.9 msup to 6.9 ms
240 Hz4.2 msup to 4.2 ms (a quarter of 60 Hz)
360 Hz2.8 msup to 2.8 ms
Tearing still happens at high refresh rates, it just flashes by faster and the offsets are smaller.

That is why someone moving from a 60 Hz screen to a 144 Hz or 240 Hz one often reports that tearing "went away" even with VSync off. It did not; it got harder to see. Before blaming tearing on your setup, it is worth checking that your monitor really runs at the refresh rate you paid for. Our refresh rate test shows the rate your browser is actually getting.

How to stop screen tearing

Every fix works the same way: it makes sure a new frame is only shown between refreshes, never in the middle of one. There are two main approaches.

  • VSync makes the GPU wait for the monitor and swap frames only in the short gap between refreshes. It removes tearing but can add input lag and stutter when the frame rate drops. What is VSync? explains the tradeoffs.
  • Variable refresh rate (NVIDIA G-SYNC, AMD FreeSync, or generic VRR) flips the relationship: the monitor waits for the GPU and starts each refresh when a new frame is ready, so the two never disagree.

For step-by-step settings for NVIDIA, AMD, Windows and individual games, see how to fix screen tearing. For a more technical description of the effect, the Wikipedia article on screen tearing is a good starting point.

The bottom line

Screen tearing means your monitor drew one refresh using two frames, because the GPU swapped in a new frame mid-scanout. The tear is horizontal because monitors draw top to bottom, it can happen at any frame rate with sync off, and it is harmless to your hardware. A higher refresh rate hides it; VSync or G-SYNC and FreeSync remove it. If you are not sure what your display is running at, run the 120 FPS test first.

Frequently asked questions

What does screen tearing mean?

It means a single refresh of your monitor is showing slices of two or more different frames, joined at a visible horizontal seam. Moving objects look cut and shifted sideways at that seam.

Why does screen tearing happen even when my FPS is below my refresh rate?

Tearing depends on when a frame arrives, not how many arrive. With sync off, a new frame shown during scanout splits the image no matter whether you are running 50 FPS or 300 FPS on a 60 Hz screen.

Can screen tearing damage my monitor or GPU?

No. It is only a timing mismatch in what gets drawn, and it puts no extra strain on the panel or graphics card. You can leave it alone if it does not bother you.

Does a 144 Hz or 240 Hz monitor get rid of screen tearing?

Not completely. Each tear lasts at most one refresh, so at 240 Hz it is on screen a quarter as long as at 60 Hz and is much harder to notice. To remove it fully you need VSync, G-SYNC or FreeSync.

← All posts