Skip to content
120 FPS Test

What Is VSync? Vertical Sync Explained

VSync (vertical sync, also written V-Sync) is a setting that makes your graphics card wait for the monitor before it shows a new frame. Instead of swapping in a fresh image whenever it happens to be ready, the GPU holds it until the screen finishes its current refresh. That stops screen tearing, and it also caps your frame rate at your refresh rate: 60 FPS on a 60 Hz screen, 144 FPS on a 144 Hz screen.

That's the whole idea. The rest of this page covers what VSync does in games, why it can add stutter and input lag, and how newer options like G-Sync, FreeSync and Fast Sync fit in.

What is VSync, in plain English?

Your monitor redraws the picture a fixed number of times per second. That's its refresh rate, measured in Hz. Each refresh is drawn top to bottom, line by line. Your GPU, meanwhile, finishes frames whenever it finishes them, which in a game is rarely in step with the monitor.

Without any sync, the GPU swaps a new frame in the moment it's done, even if the monitor is halfway down the screen. The top of the screen shows the old frame and the bottom shows the new one. When the camera moves, the two don't line up and you see a horizontal split. That's screen tearing.

Vertical sync fixes this with one rule: only swap frames during the short gap between refreshes (the "vertical blanking interval", which is where the name comes from). Every refresh then shows exactly one complete frame.

refreshrefreshrefreshrefreshOffABCDnew frame swapped in mid-refresh = tearOnABCD● frame ready → waits for the next refresh
With VSync off, frames are shown the instant they finish, often partway through a refresh, which causes tearing. With VSync on, a finished frame waits for the next refresh.

What does VSync do to your FPS?

Because the GPU can only hand over one new frame per refresh, VSync caps your FPS at the refresh rate. If your PC could run a game at 200 FPS on a 144 Hz monitor, VSync holds it to 144. The GPU simply idles until the next refresh, which also means less heat and fan noise.

You can see this cap right now. Web browsers draw in sync with the display, so every page you visit is effectively VSync'd. Open our FPS checker and the FPS reading will settle at your screen's refresh rate (60, 120, 144 and so on) and never go above it, no matter how fast your computer is. That flat line on the frame time graph is VSync in action.

If the reading sits at 60 on a monitor you bought as 120 Hz or 144 Hz, the cap is doing its job but your refresh rate is set wrong somewhere. Our checklist on why your FPS is capped at 60 walks through the usual causes.

VSync stutter: what happens below your refresh rate

VSync works well as long as the GPU finishes every frame before the next refresh. On a 60 Hz screen that means under 16.7 ms per frame. When a frame takes longer, it misses its refresh and has to wait for the next one. The monitor shows the previous frame a second time, so that frame stays on screen for 33.3 ms instead of 16.7 ms.

A few of these in a row feel like a hitch, or stutter. With classic double buffering (one buffer on screen, one being drawn), the GPU can't start the next frame while it waits, so a game that can only manage 50 FPS on a 60 Hz monitor can fall all the way to 30 FPS. Frame times jump between 16.7 ms and 33.3 ms rather than sitting at a steady 20 ms.

Does triple buffering help?

Partly. Triple buffering adds a second back buffer so the GPU can keep drawing while a finished frame waits for its refresh. You get frame rates between the steps (say 50 FPS instead of 30), but each frame is still shown for a whole number of refreshes, so motion is uneven and some judder remains. It also uses a little more video memory. NVIDIA's driver setting notes that triple buffering "improves performance when Vertical sync is also turned on", and in many games the in-game VSync option already uses three buffers.

Your FPS (60 Hz screen)VSync offVSync on
Above 60Tearing, lowest lagCapped at 60, no tearing, more lag
Exactly 60Tearing (frames rarely line up)Smooth, no tearing
Below 60Tearing, smooth-ishStutter as frames repeat; may drop to 30 with double buffering
How VSync behaves depending on whether your GPU keeps up with the refresh rate.

Does VSync add input lag?

Yes. Holding frames until the next refresh means what you see is a little older than it would be with VSync off. It's worst when your GPU is much faster than the monitor: finished frames back up in the queue, and each one waits its turn, so your mouse movement can take several frames to show up. On a 60 Hz screen each frame is 16.7 ms, so that adds up quickly. At 144 Hz or 240 Hz the penalty per frame is smaller, which is one reason VSync bothers people less on fast monitors.

That's why competitive players usually turn VSync off and accept some tearing. For single-player games where a clean image matters more than the last few milliseconds, VSync on is a fair choice. Capping your frame rate just under the refresh rate also cuts most of the queued-frame lag.

VSync vs G-Sync, FreeSync and Fast Sync

G-Sync and FreeSync (VRR)

Variable refresh rate (VRR) flips the relationship around. Instead of the GPU waiting for the monitor, a G-Sync, FreeSync or other VRR monitor waits for the GPU and refreshes the moment each frame is ready. As long as your FPS stays inside the monitor's VRR range, there's no tearing, no repeated frames and very little added lag. If your monitor supports it, VRR is the best answer to the problem VSync was built to solve.

VSync still has a small role with G-Sync. Blur Busters' widely used G-Sync 101 testing recommends G-Sync with VSync on in the NVIDIA Control Panel (and off in the game), plus a frame rate cap at least 3 FPS below your refresh rate. The cap keeps you inside the VRR range so the VSync behavior never actually kicks in, and VSync just catches the odd frame that would otherwise tear.

Fast Sync and Enhanced Sync

NVIDIA Fast Sync and AMD Enhanced Sync are for fixed-refresh monitors when your FPS is well above the refresh rate. The GPU keeps rendering flat out, and at each refresh the monitor gets the newest complete frame. Extra frames are thrown away. NVIDIA describes it as a way to improve latency "without introducing tearing". The downside is uneven pacing (the frames you see weren't rendered at even intervals), so it works best when your FPS is many times your refresh rate. Enhanced Sync also turns sync off when FPS drops below the refresh rate, trading a bit of tearing for less stutter.

You'll find these under "Vertical sync" in the NVIDIA Control Panel and NVIDIA App (Off, On, Fast, Adaptive) and under "Wait for Vertical Refresh" in AMD Software. NVIDIA's Adaptive mode handles the low end the same way Enhanced Sync does: VSync on when FPS is above the refresh rate, off when it drops below.

OptionTearingInput lagBest for
VSync offYesLowestCompetitive games
VSync onNoHighestSingle-player on a fixed-refresh screen
Fast Sync / Enhanced SyncNo (above refresh)LowFPS far above refresh, no VRR monitor
G-Sync / FreeSyncNo (inside VRR range)LowAnyone with a VRR monitor
Quick comparison of the main sync options.

Should you turn VSync on or off?

  • You have a G-Sync or FreeSync monitor: turn VRR on, cap FPS a few frames below the refresh rate, and follow your GPU vendor's VSync advice above.
  • You play competitive shooters: VSync off. Lower lag beats a few tears.
  • Tearing bothers you in a slower game: VSync on. If it stutters, lower settings until you hold your refresh rate.

If tearing is your main problem, our guide on how to fix screen tearing goes through every option step by step. And before you change anything, run a quick 120Hz refresh rate test to make sure your monitor is actually running at the Hz you paid for, since that number is the cap VSync will hold you to.

Frequently asked questions

What does VSync mean?

VSync is short for vertical synchronization. It means the graphics card only swaps in a new frame between screen refreshes, so the monitor never draws parts of two frames at once.

Does VSync lower FPS?

It caps FPS at your refresh rate, so a game that could run at 200 FPS on a 144 Hz monitor shows 144. If your PC cannot keep up with the refresh rate, VSync can also drop FPS further, for example toward 30 on a 60 Hz screen with double buffering.

Is VSync good for gaming?

It depends on the game. VSync gives a clean, tear-free image, which suits slower single-player games, but the added input lag makes most competitive players turn it off.

Should I use VSync with G-Sync or FreeSync?

Many players enable VSync in the driver alongside G-Sync and cap FPS a few frames below the refresh rate. The cap keeps the game inside the variable refresh range, so you get no tearing without the usual VSync lag.

Why is my FPS stuck at 60 with VSync on?

VSync caps FPS at the refresh rate, so a 60 FPS ceiling means your display is running at 60 Hz. Check that your monitor is set to its highest refresh rate in Windows or macOS display settings.

← All posts